LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 589 (Engine 4.6 & 5.4L) >> In-Vehicle Repair >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different car, the 2004 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the valve tappets in their original locations.
    Fig 1: Installing Valve Tappets In Locations
    G02762906Courtesy of FORD MOTOR CO.
  2. Install the camshaft roller followers. For additional information, refer to CAMSHAFT ROLLER FOLLOWER .
scientia non olet · About LEMON Manuals