LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 588 (Engine System-General Information) >> General Procedures >> Crankshaft Main Bearing Journal - Diameter

Crankshaft Main Bearing Journal - Diameter

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure each of the crankshaft main bearing journal diameters in at least two directions.
    • Refer to the appropriate ENGINE MECHANICAL article for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate ENGINE MECHANICAL article for the procedure.
    Fig 1: Measuring Of Crankshaft Main Bearing Journal Diameters
    G02762549Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals