LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 580 (Rear Drive Axle/Differential-Ford 9.75" Ring Gear) >> In-Vehicle Repair >> Differential Housing Cover >> Removal

Differential Housing Cover: Removal

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to IDENTIFICATION CODES .
  2. Remove the differential housing cover.
    1. Remove the 12 bolts, and drain the lubricant from the rear axle housing.
    2. Remove the differential housing cover.
    Fig 1: Removing Differential Housing Cover
    G02761082Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals