LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Starting System) >> Removal & Installation >> Starter Motor >> Removal & Installation (3.0L)

Removal & Installation (3.0L)

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect battery ground cable. Raise and support vehicle. Remove bolts, and lower starter motor. Remove cap, terminal nuts and starter motor. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals