LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Safety Belt System) >> Removal And Installation >> Front Safety Belt >> Item 2: Upper B -Pillar Trim Panel Installation Note

Item 2: Upper B -Pillar Trim Panel Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the safety belt shoulder height adjuster and trim panel slider plate to the uppermost position for correct installation.
    Fig 1: Raising Safety Belt Shoulder Height Adjuster And Trim Panel Slider Plate
    G03184016Courtesy of FORD MOTOR CO.