LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 571 (Safety Belt System) >> Removal And Installation >> Front Safety Belt >> Item 16: Safety Belt Buckle Pretensioner Removal Note

Item 16: Safety Belt Buckle Pretensioner Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the safety belt buckle switch and release the pin-type retainer.
    Fig 1: Disconnecting Safety Belt Buckle Switch
    G03184014Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals