LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Liftgate Release Handle >> item 15: Rivet Removal Note

item 15: Rivet Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If the liftgate release handle is damaged, inspect the license plate shield. If the shield is damaged install a new license plate shield.
  1. Remove the 4 bolts and the license plate lamp shield.
    Fig 1: Removing Bolts Of License Plate Lamp Shield
    G03183999Courtesy of FORD MOTOR CO.
  2. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals