LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Ignition Lock Cylinder >> item 8: Ignition Lock Cylinder Removal Note

item 8: Ignition Lock Cylinder Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the ignition switch in the ON position, press the locking pin with a suitable tool and remove the cylinder.
scientia non olet · About LEMON Manuals