LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Handles, Locks, Latches And Entry Systems) >> Removal And Installation >> Ignition Lock Cylinder >> Notes

Ignition Lock Cylinder: Notes

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION CHART

Item Specification
Multi-Purpose Grease Spray XL-5 ESB-M1C93-B
  1. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Exploded View Of Ignition Lock Cylinder
    G03184000Courtesy of FORD MOTOR CO.
  2. To install, reverse the removal procedure.