LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Seat System) >> Disassembly And Assembly >> Rear Seat Cushion - 40 Percent of 60/40 Bench, Second Row >> item 7: Cushion Trim Cover Disassembly Note

item 7: Cushion Trim Cover Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Use care when separating the seat upholstery from the hook and loop strip, or the hook and loop strip can be torn from the seat cushion foam pad.
  1. Separate the hook and loop fasteners.
  1. When installing the backrest to the cushion, make sure the latch cover does not come in contact with the latch cable conduit or end fitting.
scientia non olet · About LEMON Manuals