LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Seat System) >> Disassembly And Assembly >> Rear Seat Cushion - 40 Percent of 60/40 Bench, Second Row >> Item 1: Latch Cover Screws Disassembly Note

Item 1: Latch Cover Screws Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the seat backrest J-clip.
    Fig 1: Releasing Seat Backrest J-Clip
    G03183912Courtesy of FORD MOTOR CO.
  2. Remove all the staples in the backrest support panel.
    Fig 2: Removing Staples In Backrest Support Panel
    G03183913Courtesy of FORD MOTOR CO.
  3. Invert the seat backrest trim cover and foam pad to access the latch cover screws.
    Fig 3: Inverting Seat Backrest Trim Cover And Foam Pad
    G03183914Courtesy of FORD MOTOR CO.
  4. Remove the two screws and the cover (outboard side shown, inboard side similar). Detach the seat backrest material attachment from the latch cover.
    Fig 4: Removing Two Screws Of Cover
    G03183915Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals