LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 569 (Seat System) >> Disassembly And Assembly >> Front Seat Backrest >> Item 2: Head Restraint Sleeves Disassembly Note

Item 2: Head Restraint Sleeves Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The inboard and outboard head restraint sleeves are not interchangeable.
    NOTE: The head restraint sleeves incorporate an alignment tab that must face forward when installed.
    Fig 1: Identifying Head Restraint Sleeves
    G03183922Courtesy of FORD MOTOR CO.
  1. Squeeze together the tip of the head restraint sleeve and pull the sleeve out of the frame tube.
scientia non olet · About LEMON Manuals