LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 568 (Body Panel System - Body System - Interior) >> Removal And Installation >> Roof Opening Panel >> Item 6: Roof Opening Panel Shield Installation Note

Item 6: Roof Opening Panel Shield Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before installing the shield, be sure the roof opening panel water channel is seated on the locking clips. The LH water channel screw must be installed first.