Item 16: Garment Hook Removal Note
WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the second and third row garment hangers.
- Open the access cover.
- Insert the flat blade screwdriver fully into the garment hanger slot.
- Rotate the screwdriver 90 degrees so that the screwdriver spreads the metal retainer clip. Remove the plastic garment hanger.
CAUTION:
To prevent damaging the garment hanger retainer, use a 3/16-inch flat blade screwdriver to carry out this step.
NOTE:
The garment hanger is shown without the roof sheet metal to show the metal retainer clip. The metal retainer clip will remain engaged in the sheet metal after the garment hanger is removed.