LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 563 (Exterior Lighting System) >> Removal And Installation >> Brake Pedal Position (BPP) Switch

Brake Pedal Position (BPP) Switch

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the components in the order indicated in the following illustration and table.
    Fig 1: Removing Brake Pedal Position Switch And Components
    G03183384Courtesy of FORD MOTOR CO.
  2. To Install, Reverse The Removal Procedure.