Pinpoint Test X: The Reversing Lamps Are On Continuously
WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- X1 CHECK THE REVERSING LAMP SWITCH
- Key in OFF position.
- Disconnect: Digital TR Sensor C167.
- Key in ON position.
- Do the reversing lamps continue to illuminate?
Yes
REPAIR circuit 140 (BK/PK). TEST the system for normal operation.
No
INSTALL a new digital TR sensor. Refer to AUTOMATIC TRANSMISSION - 5R55S . TEST the system for normal operation.