LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Removal >> Transmission - 4x4 >> Item 25: Heat Shield Screws Removal Note

Item 25: Heat Shield Screws Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the two heat shield screws and position the heat shield aside to gain access to the oxygen sensor connectors.
scientia non olet · About LEMON Manuals