LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Removal >> Transmission - 4x2 >> Item 32: Torque Converter Nuts Removal Note

Item 32: Torque Converter Nuts Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make an identifying mark on the nut, stud and flexplate to allow for correct installation.
    Fig 1: Removing Torque Converter Nuts
    G03182102Courtesy of FORD MOTOR CO.
  1. Remove the four torque converter nuts.