LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly >> Transmission >> Item 71: Center Shaft and Forward Clutch Cylinder Bearing Assembly No. 5 Disassembly Note

Item 71: Center Shaft and Forward Clutch Cylinder Bearing Assembly No. 5 Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the No. 5 forward clutch cylinder thrust bearing, tag and identify.
    Fig 1: Removing No. 5 Forward Clutch Cylinder Thrust Bearing
    G03182162Courtesy of FORD MOTOR CO.