LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly >> Transmission >> Item 61: Center Support Bolt Disassembly Note

Item 61: Center Support Bolt Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: The center support locknut could fall into the remaining assembly if not removed.
    Fig 1: Removing Screw
    G03182151Courtesy of FORD MOTOR CO.
  1. Remove the screw.