LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly >> Transmission >> Item 60: Center Shaft and Forward Clutch Cylinder Bearing Assembly No. 3 Disassembly Note

Item 60: Center Shaft and Forward Clutch Cylinder Bearing Assembly No. 3 Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Tag and identify the center shaft thrust bearing (No. 3) for assembly.
    Fig 1: Removing No. 3 Center Shaft Thrust Bearing
    G03182150Courtesy of FORD MOTOR CO.
  1. Remove the No. 3 center shaft thrust bearing.
scientia non olet · About LEMON Manuals