LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Reverse Servo Assembly >> Item 7: Reverse Servo Piston 0-Ring Assembly Note

Item 7: Reverse Servo Piston 0-Ring Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Try not to roll the seal onto the housing when installing the seal or damage to the seal can occur.
    Fig 1: Installing Reverse Servo Piston Seal
    G03182253Courtesy of FORD MOTOR CO.
  1. Lubricate and install a new reverse servo piston seal.