LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Overdrive Planetary and One-Way Clutch Assembly >> Item 4: No. 2 Overdrive Planetary Thrust Bearing Assembly Note

Item 4: No. 2 Overdrive Planetary Thrust Bearing Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Use petroleum jelly to hold the No. 2 overdrive planetary thrust bearing in place.
    Fig 1: Installing No. 2 Overdrive Planetary Thrust Bearing
    G03182248Courtesy of FORD MOTOR CO.
  1. Install the No. 2 overdrive planetary thrust bearing.
scientia non olet · About LEMON Manuals