LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Overdrive Planetary and One-Way Clutch Assembly >> Item 1: Retaining Ring Assembly Note

Item 1: Retaining Ring Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The overdrive one-way clutch is serviced with the center shaft assembly.
    Fig 1: Installing Center Shaft And Overdrive One-Way Clutch
    G03182249Courtesy of FORD MOTOR CO.
  1. Install the center shaft and overdrive one-way clutch.
    1. Install the center shaft and overdrive one-way clutch.
    2. Install the overdrive center shaft retaining ring.
scientia non olet · About LEMON Manuals