LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Fluid Pump >> Item 1: Seal Ring Assembly Note

Item 1: Seal Ring Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Inspect the fluid pump gears for cracks and scoring.
    Fig 1: Installing O-Ring Seal In Fluid Pump Drive Gear
    G03182186Courtesy of FORD MOTOR CO.
  1. Install new O-ring seal in the fluid pump drive gear.
    2. CAUTION: Lubricate the special tool with multi-purpose grease.
    Fig 2: Seating O-Ring Seal In Pump Gear
    G03182187Courtesy of FORD MOTOR CO.
  2. Using the special tool, seat the O-ring seal in the pump gear.
scientia non olet · About LEMON Manuals