LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Direct Clutch Drum Assembly >> Item 5: Retaining Ring Disassembly Note

Item 5: Retaining Ring Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: After removing the retaining ring, use care when releasing the pressure on the springs. Failure to follow these instructions may result in personal injury.
    CAUTION: Do not fully compress the special tool or damage to the spring retainer may occur.
    Fig 1: Removing Direct Clutch Piston Retaining Ring
    G03182212Courtesy of FORD MOTOR CO.
  1. Using the special tool, remove the direct clutch piston retaining ring.
scientia non olet · About LEMON Manuals