LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Diagnosis And Testing >> External Controls >> Inspection and Verification

Inspection and Verification

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the transmission external control.
  2. Visually inspect for obvious signs of mechanical and electrical damage; refer to the following VISUAL INSPECTION CHART :
    VISUAL INSPECTION CHART

    Mechanical Electrical
    • Damaged shift lock actuator
    • Damaged transmission control switch (TCS)
    • Damaged shift interlock switch
    • Failed fuse(s)
    • Damaged wiring harness
    • Loose or corroded connections
    • Damaged shift interlock switch
  3. If the fault is not visually evident, determine the symptom. GO to SYMPTOM CHART .