Item 93: Front Fluid Pump Seal Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Check and make sure that the garter spring in the seal has not popped off of the converter hub seal.

Fig 1: Installing Seal Onto Special Tool

Courtesy of FORD MOTOR CO.

Install a new seal onto the special tool.
Using the special tool, install a new converter hub seal.

Fig 2: Installing Converter Hub Seal
Courtesy of FORD MOTOR CO.