LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Assembly >> Transmission >> Item 5: Manual Control Lever Shaft Assembly Note

Item 5: Manual Control Lever Shaft Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Align the flats on the manual valve inner lever with the flats on the manual control lever shaft.
    Fig 1: Installing Manual Control Lever Shaft
    G03182268Courtesy of FORD MOTOR CO.
  1. Install the manual control lever shaft.