LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Automatic Transmission) >> Assembly >> Transmission >> Item 18: Output Shaft Retaining Ring Assembly Note

Item 18: Output Shaft Retaining Ring Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Always install a new output shaft retaining ring.
    Fig 1: Installing Output Shaft Retaining Ring
    G03182277Courtesy of FORD MOTOR CO.
  1. Install a new output shaft retaining ring.
scientia non olet · About LEMON Manuals