LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Intake Air System, Fuel Charging System & Engine Electronics System-4.6L (2V) Engine) >> Removal And Installation >> Fuel Injection Supply Manifold And Fuel Injector >> Item 23: O-Ring Seal Removal Note

Item 23: O-Ring Seal Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Use o-ring seals that are made of special fuel-resistant material. Use of ordinary o-rings can cause the fuel system to leak. Do not reuse the o-ring seals.
  1. Install new o-ring seals.
    Fig 1: Installing O-Ring Seals
    G03181872Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals