LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 555 (Intake Air System, Fuel Charging System & Engine Electronics System-4.6L (2V) Engine) >> Removal And Installation >> Fuel Injection Supply Manifold And Fuel Injector >> Item 1: Fuel Tube Spring Lock Coupling Removal Note

Item 1: Fuel Tube Spring Lock Coupling Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the special tool.
    Fig 1: Installing Special Tool
    G03181868Courtesy of FORD MOTOR CO.
  2. Close and push the special tool into the open side of the cage.
    Fig 2: Pushing Special Tool Into Open Side Of Cage
    G03181869Courtesy of FORD MOTOR CO.
  3. Separate the fuel tube fitting.
    Fig 3: Separating Fuel Tube Fitting
    G03181870Courtesy of FORD MOTOR CO.
  4. Remove the special tool.
    Fig 4: Removing Special Tool
    G03181871Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals