LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Engine - 4.6L) >> In-Vehicle Repair >> Valve Cover LH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the evaporative emissions (EVAP) canister purge valve. For additional information, refer to FUEL SYSTEM .
  2. Remove the parts in the order indicated in the following illustrations and tables.
    Fig 1: Removing Crankcase Ventilation Hose And Oil Dipstick Tube
    G03181078Courtesy of FORD MOTOR CO.
    Fig 2: Removing LH Valve Cover
    G03181079Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals