LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Engine - 4.6L) >> In-Vehicle Repair >> Flexplate and Crankshaft Rear Seal >> Item 4: Crankshaft Rear Oil Seal Slinger Installation Note

Item 4: Crankshaft Rear Oil Seal Slinger Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tools, install the crankshaft rear oil slinger.
    Fig 1: Installing Crankshaft Rear Oil Seal (2 Of 2)
    G03181190Courtesy of FORD MOTOR CO.