LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Engine - 4.6L) >> In-Vehicle Repair >> Engine Front Cover, Timing Gears, Chain and Tensioners >> Item 2: Power Steering Pressure Hose Installation Note

Item 2: Power Steering Pressure Hose Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the appropriate special tool, install a new O-ring seal on the power steering pressure hose fitting.
    Fig 1: Installing Power Steering Pressure Hose
    G03181142Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals