LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (Engine - 4.6L) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Item 8: Camshaft Sprocket Bolt Assembly Note

Item 8: Camshaft Sprocket Bolt Assembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Make sure the valve train does not rotate while tightening the bolt.
  1. Tighten the camshaft sprocket bolt to 40 Nm (30 lb-ft) then rotate 85°-95°.
scientia non olet · About LEMON Manuals