LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Flexplate and Crankshaft Rear Seal >> Item 5: Crankshaft Rear Oil Seal Removal Note

Item 5: Crankshaft Rear Oil Seal Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Avoid scratching or damaging the crankshaft rear oil seal running surface during removal of the crankshaft rear oil seal.
    Fig 1: Removing Crankshaft Rear Oil Seal
    G03180639Courtesy of FORD MOTOR CO.
  1. Using the special tools, remove the crankshaft rear oil seal.