LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Exhaust Manifold RH >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the exhaust gas recirculation (EGR) tube. For additional information, refer to EXHAUST GAS RECIRCULATION (EGR) VALVE .
  2. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Removing Exhaust Manifold RH
    G03180600Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
  4. Install the EGR tube. For additional information, refer to EXHAUST GAS RECIRCULATION (EGR) VALVE .
scientia non olet · About LEMON Manuals