LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Crankshaft Pulley and Crankshaft Seal - Late Build >> Item 3: Front Crankshaft Seal Removal Note

Item 3: Front Crankshaft Seal Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool, remove the crankshaft front seal.
    Fig 1: Removing Crankshaft Front Seal
    G03180473Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals