LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Camshaft, Valve Springs and Valve Seals - RH >> Items 3, 4 and 5: Valve Spring Retainer Keys, Valve Spring Retainers and Valve Springs Removal Note

Items 3, 4 and 5: Valve Spring Retainer Keys, Valve Spring Retainers and Valve Springs Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the piston of the cylinder being serviced at top dead center (TDC).
  2. Hold the valves in the cylinder head.
    • Remove the spark plug of the cylinder being serviced.
    • Use a suitable tool to apply air pressure to the cylinder.
  3. Using the special tool, remove the valve spring retainer keys, valve spring retainers and the valve springs.
    Fig 1: Removing Valve Spring Retainer Keys Valve Spring Retainers And Valve Springs
    G03180581Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals