LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Camshaft, Valve Springs and Valve Seals - RH >> Item 5, 4, and 3: Valve Spring, Valve Spring Retainer, Valve Spring Retainer Keys Installation Note

Item 5, 4, and 3: Valve Spring, Valve Spring Retainer, Valve Spring Retainer Keys Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: If air pressure has forced the piston to the bottom of the cylinder any loss of air pressure will allow the valve to fall into the cylinder. If air pressure must be removed, support the valve prior to removal.
    Fig 1: Installing Valve Spring and Valve Spring Retainer
    G03180591Courtesy of FORD MOTOR CO.
  1. Using the special tool, install the valve spring, valve spring retainer, and the valve spring retainer keys.
scientia non olet · About LEMON Manuals