LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> In-Vehicle Repair >> Camshaft Roller Follower and Hydraulic Lash Adjuster >> Item 2: Hydraulic Lash Adjuster Removal Note

Item 2: Hydraulic Lash Adjuster Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Mark each hydraulic lash adjuster to make sure it is returned to its original position.
    Fig 1: Identifying Hydraulic Lash Adjuster
    G03180597Courtesy of FORD MOTOR CO.
  1. Remove the hydraulic lash adjusters.