LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 551 (Engine - 4.0L) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Item 3: Hydraulic Lash Adjuster Disassembly Note

Item 3: Hydraulic Lash Adjuster Disassembly Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Mark each hydraulic lash adjuster to make sure it is installed in its original position.
    Fig 1: Removing Hydraulic Lash
    G03180828Courtesy of FORD MOTOR CO.
  1. Remove the hydraulic lash adjusters.