LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 549 (Steering System) >> Removal And Installation >> Steering Gear >> Item 15: Outer Tie-Rod Removal Note

Item 15: Outer Tie-Rod Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Do not damage the tie-rod boot while installing the special tool.
    Fig 1: Separating Tie-Rod End From Wheel Knuckle
    G03180384Courtesy of FORD MOTOR CO.
  1. Using the special tool, separate the tie-rod end from the wheel knuckle.
  2. Note the number of times the tie-rod ends turn for assembly reference.
  3. After removing the tie-rod end, remove the tie-rod end jam nut from the front wheel spindle tie-rod.
scientia non olet · About LEMON Manuals