LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (Anti-Lock Control System) >> Removal And Installation >> Brake Pressure Transducer >> Item 2: Brake Pressure Transducer Installation Note

Item 2: Brake Pressure Transducer Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. After the brake pressure transducer is installed, it is necessary to bleed the brake system. For additional information, refer to BRAKE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals