LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 547 (Brake System) >> Removal And Installation >> Parking Brake >> Item 5: Parking Brake Control Bolts Removal Note

Item 5: Parking Brake Control Bolts Removal Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, REFER to BATTERY DISCONNECT .
  2. Loosen the bolt and disconnect the instrument panel-to-body harness electrical connector.
    Fig 1: Loosening Instrument Panel-To-Body Harness Electrical Connector Bolt
    G03180245Courtesy of FORD MOTOR CO.