LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 547 (Brake System) >> Removal And Installation >> Brake Pedal >> Item 1: Speed Control Deactivator Switch Installation Note

Item 1: Speed Control Deactivator Switch Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: The brake pedal must be connected to the booster rod, in an at-rest position, before installing the speed control deactivator switch or the switch will be damaged.
  1. Install the switch.
scientia non olet · About LEMON Manuals