LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 546 (Suspension System) >> Removal And Installation >> Stabilizer Bar and Link - Front >> Removal and Installation >> Item 4: Stabilizer Bar-to-Frame Bolts Installation Note

Item 4: Stabilizer Bar-to-Frame Bolts Installation Note

WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect and clean the mating surfaces and the internal threads. Make sure all mating surfaces are free of foreign material and remove any Locktite from the internal threads. Install new stabilizer bar bolts.
scientia non olet · About LEMON Manuals