LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Safety Belt System) >> Removal And Installation >> Front Safety Belt >> Item 4: Height Adjuster Button Cover Installation Note

Item 4: Height Adjuster Button Cover Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install the height adjuster button cover, squeeze the buttons and place the bottom of the cover in first.
    Fig 1: Squeezing Buttons
    G03247083Courtesy of FORD MOTOR CO.