LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Safety Belt System) >> Removal And Installation >> Front Safety Belt >> Item 13: Seat Side Trim Panel Installation Note

Item 13: Seat Side Trim Panel Installation Note

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: It is necessary to rezero the OCS system when a front passenger seat cushion is disassembled, a new trim cover installed, a seat side shield removed, or an OCS service kit is installed. A scan tool is used to trigger the active command to carry out rezeroing of the OCS system.
  1. After completing the installation of the passenger seat side trim panel and seat, the OCS system must be rezeroed to ensure system integrity.
scientia non olet · About LEMON Manuals